Are you trying to park your Audi when you suddenly realize that the parking sensors have stopped working or are giving misleading readings? It can be quite annoying, more so if you are depending on those sensors to maneuver through narrow areas without collisions. If this sounds familiar, your Audi might be having problems with parking sensor calibration.

Parking sensors are among the features that make Audi vehicles unique and easy to drive, but when they are not functioning properly, they are more of a problem than a helping hand. Let’s find out what parking sensor calibration is, why there are problems, how to solve them, and how to prevent them.

What are Parking Sensors?

Audi’s parking sensors are among its advanced driver-assistance systems (ADAS). These small devices either employ ultrasonic waves or electromagnetic signals to locate objects surrounding your car. They are most useful when maneuvering through narrow spaces or when trying to avoid an object during parallel parking. The parking sensors in their optimal functioning make beeping sounds when an object is near. The closer one gets, the more the beeping increases. But when calibration is off, those helpful warnings might be late, inaccurate, or even non-existent and this can lead to minor collisions that will scratch your sleek-looking vehicle.

What Are the Possible Sources of Parking Sensor Calibration Problems?

  • Bumper Damage or Replacement: Even the smallest of accidents or changes in the bumper of the car may affect the alignment of the sensors. Such components are very delicate and the slightest change in their position alters the operation of your parking sensor.
  • Dirt or Debris Accumulation: The sensors can be blocked by dirt or snow, and various objects that can prevent them from sending or receiving signals either completely or to some extent. They need to be cleaned quite often if they are to continue producing the best results as intended.
  • Electrical Malfunctions: Poor connections, broken wires, or poor contacts at the terminals cause defective communication between the sensors and the vehicle’s computer system and end up as calibration problems or sensor failure.
  • Software Issues: Modern Audi vehicles rely on software to control parking sensors to a very large extent. Sometimes due to bugs or old software, the sensors get affected and might be out of calibration; this may be solved by diagnosing the sensors or installing updates.
  • Improper Installation: If the sensors were installed or replaced improperly, they could have been aligned in the wrong way and may read wrong, or not at all.

How To Repair Parking Sensor Calibration Problems

  • Inspect the Sensors: From experience, it is usually a great idea to frequently check whether the sensors are blocked or not in order to guarantee they work as expected. If any, wash the surface gently using warm water, and later on use a clean fabric to wipe the surface in order to remove any particle that may affect the working of the sensor.
  • Restart Your Audi: In some cases, the software problems may be repaired by a straightforward reboot of the system. Switch off your car and start it after some time then check whether the parking sensors are working well.
  • Check for Error Codes: If the problem continues, then it is possible that the computer of your Audi has recorded some error codes linked to the parking sensors. A professional diagnostic scan will be very useful in making an accurate diagnosis of the problem.
  • Recalibrate the Sensors: Calibration of sensors usually demands specific equipment and knowledge. If you want the recalibration to be done in the correct way you need to involve a reputable Audi repair shop.
  • Change Defective Sensors: If a sensor is damaged beyond repair it needs to be replaced. It is highly recommended to put genuine Audi parts to make sure that every system is accurate.

Bring Your Audi To Our Experts For Accurate Parking Sensor Calibrations

Every car owner understands how irritating Audi Parking Sensor Check parking sensor calibration problems can be, but they are not the end of the world. If you are in need of Audi repair, look no further than Bimmer Performance; we are here to assist you.

Whether it’s adjusting the parking sensors, identifying system issues, or just general maintenance, we have you covered. Our shop is conveniently positioned in Houston, TX but we render help to drivers from nearby cities such as Cinco Ranch, Katy, Mission Bend, and Sugar Land. Call us now to set an appointment and let us help you get back to parking like how it used to be.

Call Now!